Jump to content

How to block one o more servers until the next one has finished its process?


Recommended Posts

Hello,

 

I have the following situation, I have a source followed by 3 servers in parallel. These servers are then connected to a fourth server, which finally leads to the sink. The thing is I need that the 3 first servers must hold the entity (stay blocked) until the fourth server is free. Additionally, if one of the 3 servers in parallel has capacity available, this one must stay blocked until de fourth server finishes its process.

 

I attached the model I made, and the main problem are the three servers in parallel  which are staying blocked after the first entity pass through.

 

Thanks in advance

block.spfx

 

Link to comment
Share on other sites

Hello Mauricio,

 

Your model is a good approach but it is incomplete because I explained myself a little wrong:

On 12/30/2020 at 1:58 PM, Sebastian Vicencio said:

I attached the model I made, and the main problem are the three servers in parallel  which are staying blocked after the first entity pass through.

What I really meant was that the server the entity came from should not start its processing time. Anyway, thanks for the effort.

 

In case anyone is wondering a similar question, I attach the solution i came up with in a even more complex version.

 

 

block.spfx

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...