antonio6vieira Posted July 16, 2015 Share Posted July 16, 2015 Hi guys. As the subject says I'm looking for a way to to be able to set the start and end data of the simulation run. While searching for alternatives I was only able to find this similar issue on this forum: http://www.simio.com/forums/viewtopic.php?f=20&t=2054&p=6659&hilit=start+time+end#p6659 However, I think that just setting the length of the run would not solve my problem, because the inputs of the model I'm working on rely on specific dates that can vary very much, depending on the data that's given to me by the companies. So are there any suggestions? Thanks. Link to comment Share on other sites More sharing options...
antonio6vieira Posted July 17, 2015 Author Share Posted July 17, 2015 Any help? Link to comment Share on other sites More sharing options...
dsturrock Posted July 19, 2015 Share Posted July 19, 2015 I don't know much about using the API, but if you search the API help (Simio API Reference Guide.chm) you will find a StartingClockTime Property. It seems like this could be used to set the value, perhaps read from a file. Link to comment Share on other sites More sharing options...
Recommended Posts