I split a lot of firewood.
I get most of my firewood in 18”-48” diameter logs that must be split lengthwise to about 6” thickness.
Years ago when I first moved into a house with a fireplace, I started cutting and splitting my own wood. I used to split wood with an 8 pound maul (a maul is like a thick-bladed axe). I frequently had to supplement that with a wedge or two driven in with a large sledge hammer. Over time, I learned to “read” the grain in the wood, so that I could split along natural cracks and save myself some effort.
A few years later I bought a wood stove to supplement my heating. As my wood demands (and my muscle tone) increased I upgraded to a 14 pound maul. What a difference. Sure it was a lot more demanding to swing, but as my aim improved just about every swing resulted in the desired division of one piece of hardwood into two. Life was good.
Ten years ago I moved into the oddity of an all-electric house in the cold Northeast and shifted even more of my heating to my woodstove. After a while I started finding it hard to manually split enough wood to keep my house warm, so I bought a hydraulic splitter. Sweet! While it is still a bit difficult to manhandle a 200-300 pound log onto the splitter, once I get it there, the hydraulic ram pretty much takes care of the rest. Sometimes with badly knotted wood, I still have to “read” the wood and be a bit creative at how I direct the splitter to get through it.
Today while I was splitting some logs my mind started to wander to some parallels between splitting firewood and doing simulation projects.
Doing it yourself is definitely not for everyone. If you don’t enjoy it, and don’t have the time and skill for it, you are probably best off buying the service from someone else.
It is amazing what a difference the right tool makes. No single tool is right for everyone. For some jobs, a lightweight tool is perfect. For other jobs, nothing less than a high-end tool makes sense.
No matter what tool you use, having the good judgment to “read” the problem can make solving it a lot easier. And the more you practice, the better you will be able to determine the best approach to solving the problem.
Until next time, Happy Modeling!
VP Products – Simio LLC