simio modelling

General Simio discussions. THIS IS *NOT* A GOOD PLACE FOR SUPPORT QUESTIONS.
To limit spam this and all Public Forums have very limited ability to attach files. We recommend that support issues and more technical topics be initiated inside one of the Simio Insider (SI) forums below where you can attach your model and see example solutions. See above Welcome forum to join Simio Insiders.
Post Reply
Thanzeel66
Posts: 8
Joined: Thu Apr 21, 2016 4:27 am

simio modelling

Post by Thanzeel66 » Wed May 18, 2016 10:40 am

Hai
I have a doubt regarding a simple model making situation, please suggest a solution. the situation is as follows.

there is a source and two station elements, station 1 and 2. I fixed the capacities as 15 for station1 and 30 for station 2. By giving add on process I can fill these stations. But I want the source to first fill the station 1 and after satisfying its capacity fill the next station. How it can be achieved and what logic is to be used for this sequence of filling.

Post Reply