Help me count at the end of the line.

General Simio discussions. THIS IS *NOT* A GOOD PLACE FOR SUPPORT QUESTIONS.
To limit spam this and all Public Forums have very limited ability to attach files. We recommend that support issues and more technical topics be initiated inside one of the Simio Insider (SI) forums below where you can attach your model and see example solutions. See above Welcome forum to join Simio Insiders.
Post Reply
gabrielaelviragm
Posts: 1
Joined: Thu Apr 07, 2016 2:32 pm

Help me count at the end of the line.

Post by gabrielaelviragm » Thu Apr 07, 2016 3:54 pm

Hello,

I’ve been trying to get some answers in order for me to continue my simulation process with Simio. At a point in the process two different entities start the line together, but at the end of the line (exit) i need to be able to count how many of them got out by separate.

I have not yet been able to get my answer in this matter by the manuals, or at least nothing to specific.

Can you help me ? Or advise me

dsturrock
Simio Team Member
Posts: 1453
Joined: Thu Mar 13, 2008 12:35 pm
Location: Sewickley, PA USA
Contact:

Re: Help me count at the end of the line.

Post by dsturrock » Thu Apr 07, 2016 8:49 pm

I'm not sure what you are asking, but it sounds like the built-in Tally on every sink should provide what you want. It records TimeInSystem and also records the count of completed entities.
Dave Sturrock
VP Operations, Simio LLC

Post Reply