Simio
  • Scheduled maintenance

  • General Simio discussions. THIS IS *NOT* A GOOD PLACE FOR SUPPORT QUESTIONS.
    To limit spam this and all Public Forums have very limited ability to attach files. We recommend that support issues and more technical topics be initiated inside one of the Simio Insider (SI) forums below where you can attach your model and see example solutions. See above Welcome forum to join Simio Insiders.
General Simio discussions. THIS IS *NOT* A GOOD PLACE FOR SUPPORT QUESTIONS.
To limit spam this and all Public Forums have very limited ability to attach files. We recommend that support issues and more technical topics be initiated inside one of the Simio Insider (SI) forums below where you can attach your model and see example solutions. See above Welcome forum to join Simio Insiders.
 #6966  by hasnan
 Thu Oct 08, 2015 12:48 am
Hi
I've built a very complex add on trigger process but i think it should be simpler, I'm not sure how to do it. I have 5 scheduled maintenance that will be carried out according to the flying hours. The first 60 hours, conduct Cx 1, second 60 hrs conduct Cx 1 but at the third 60 hrs it will conduct Cx 2, and so on. This is basically how the schedule look like.

60 60 60 60 60 60 60 60 60
Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 3
60 60 60 60 60 60 60 60 60
Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 4
60 60 60 60 60 60 60 60 60
Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 2 Cx 1 Cx 1 Cx 3

How should I write the routing logic? Very much appreciate it. Thanks
 #6970  by MEagar
 Thu Oct 08, 2015 9:36 pm
Use as timer which executes a custom process (timer_MTBF.Event).

You may then simplify the MTTR logic within the event driven process.

Hope this helps.