Stopping simulation run after 10.000 entities are disposed

General Simio discussions. THIS IS *NOT* A GOOD PLACE FOR SUPPORT QUESTIONS.
To limit spam this and all Public Forums have very limited ability to attach files. We recommend that support issues and more technical topics be initiated inside one of the Simio Insider (SI) forums below where you can attach your model and see example solutions. See above Welcome forum to join Simio Insiders.
Post Reply
Nadine
Posts: 29
Joined: Fri Jun 14, 2013 10:31 am

Stopping simulation run after 10.000 entities are disposed

Post by Nadine » Mon Jun 17, 2013 4:33 am

Can I stop the simulation run after 10.000 entities are disposed?

miguelgaitan
Posts: 14
Joined: Sun May 19, 2013 4:08 pm

Re: Stopping simulation run after 10.000 entities are dispos

Post by miguelgaitan » Mon Jun 17, 2013 9:46 am

Hi!,

Check the Simbit(Support tab>Sample Simbit Solutions): "Using a Monitor", it stops the simulation and records stats about the event that triggered it. In the example it's monitoring the length of the queue but that can be easily changed to check how many entities have entered your sink, or per each entity type how many have been destroyed.

regards

dsturrock
Simio Team Member
Posts: 1455
Joined: Thu Mar 13, 2008 12:35 pm
Location: Sewickley, PA USA
Contact:

Re: Stopping simulation run after 10.000 entities are dispos

Post by dsturrock » Mon Jun 17, 2013 10:50 am

One way is to add your own TallyStatistic and use the Stopping Condition property:
TallyStatistic.PNG
(FYI, You cannot use this feature on predefined internal statistics)


Another easy way that will work in some situations is to use the Maximum Arrivals property on the Source object and then set your Ending Type on the Run Ribbon to Infinite. This will create 10000 entities and run until the last one gets destroyed.
MaxArrivals.PNG
You do not have the required permissions to view the files attached to this post.
Dave Sturrock
VP Operations, Simio LLC

Nadine
Posts: 29
Joined: Fri Jun 14, 2013 10:31 am

Re: Stopping simulation run after 10.000 entities are dispos

Post by Nadine » Sun Jun 23, 2013 11:35 am

Thank you!!

Post Reply